Attention Please

PLEASE BE CAREFUL WHENEVER YOU'RE USING A PC AT A PUBLIC PLACE (Like INTERNET CAFES..ETC).
CHECK THE BACK OF THE PC AND SEE IF THE BELOW DEVICE IS THERE..IF SO..DO NOT USE IT!!!!

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers. Finding IP address in Hotmail 1. Log into your Hotmail account with your username and password. 2. Click on the Mail tab on the top. 3. Open the mail. 4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers, * Click on Options on the top-right corner * In the Mail Options page, click on Mail Display Settings * In Message Headers, make sure Advanced option is checked * Click on Ok button * Go back to the mails and open that mail. 5. If you find a header with X-Originating-IP: followed by an IP address, that is the sender's IP addressHotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9. 6. If you find a header with Received: from followed by a Gmail proxy like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9. 7. Or else if you have headers like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9. 8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com. 9. Track the IP address of the sender

Make URLs shot

01DecentURL is something like TinyUrl that provides you URL shortening service. DecentURL can make URLs short too, but its main purpose is to make URLs more readable. It automatically grabs the title of the page and use it to make the DecentURL. It also includes the domain to let you see where you’re going.
URL redirection is far from a novel idea – there are at least 41 other services that do it. As far as I can tell, however, those sites all focus on making long addresses short. DecentURL can make URLs short too, but its primary goal is to make them decent. Teach ’em some manners.

Read-you-scraps-without-logging-in-your

There is unique method to read your scraps without even logging in to your orkut account .

For that you just require your UID........dont take tension that whats uid???? just open your scrapbook.....check out the address bar : something like this link will be there

http://orkut.com/Scrapbook.aspx?uid=706185626704730513

copy the code written after that 'uid=' ie here in above example uid is 706185626704730513

Thats it.....

Now paste this Uid in following link and open the link in FireFox{4 better results,better look} or Internet Explorer{most sicko looks of your scrap book}...

And if you try to open this above link and your administrator has blocked this then use www.stupidcensorship.com n in on this site place the above mentioned link and start browsing.

http://www.indian-tv.com/orkut.php?uid=[your uid]

NOTE: Mozilla FireFox has got better results

Download Latest Version Of Mozilla FireFox here for free

Remove run

Who wants to delete "RUN"

I really don't know why someone could wish to remove RUN from START MENU, but if you're one of them, you can do that, too.

REGEDIT

HKEY_CURRENT_USER\Software\Microsoft\Windows\ CurrentVersion\Policies\Explorer

Double click on "NoRun" and change "ValueData" from 0 to 1.

Close Regedit, and restart computer. 

Rerards: sumod007@gmail.com

 Edit image- make it easy

Well these tips are for beginners..OK?? To those who doesn’t know anything about image editing

How to censor/pixelate

If there are part of an image or something which you dont want others to see, you can pixelate them. For best understanding, it is to censor the image. Select the part of the image with the Lasso Tool (Shortcut key = Shift +L). After selecting the area, go to Filter in the menu bar and then to Pixelate, select Mosaic. You will get a new dialogue box where you can specify your own cell size. Your changes are previewed automatically and you’ll know when to press OK. (Normally enter 8-12 for small sized images). Please make sure your preview window is checked

How to invert the colour of a pic

You will find various inverted pictures on the net, which do look good when inverted। To see the original colour or to invert the colour of the picture, the easiest way is to open the picture with MSPaint or Adobe Photoshop. Press Ctrl+i and you’ll see the magic.

Rotate and Flip

To rotate a picture, follow the steps. Click Image on the menu bar > Rotate Canvas > you can choose whatever you like. Arbitrary means you can specify your own degree for the image to rotate. You can also flip the picture vertically or horizontally. Check it out by selecting Flip Horizontally or Flip Vertically.

 Regards: sumod007@hotmail.com

To change the size of a picture

Many pictures comes with large size, for eg. 3000×2500 pixels. This will take a long time to open/load esp on the net. To change the size of the image, open the big-sized image with Adobe Photoshop. On the menu bar select Image, then Image Size. You’ll get a dialogue box where you can enter your own specifications. Please make sure that Constrain Proportion is checked, otherwise you’ll get a horrible figure. For eg, enter 600 in the width box, you dont have to manually enter the height. And make sure your measurements are in terms of pixels, which is easiest to understand. After you enter the size, press OK. Your picture is small now!!

Regards: sumod007@indiatimes.com

 Danger of "CTRL+C" on web

Posted: 14 Dec 2007 06:02 AM CST

We do copy various data by ctrl+c for pasting elsewhere. This copied data is stored in clipboard and is accessible from the net by a combination of Javascripts and ASP.

Just try this:

1) Copy any text by 'ctrl+c'

2) Do not keep sensitive data (like passwords, reditcard numbers, PIN etc.) in the clipboard while surfing the web. It is extremely easy to extract the text stored in the clipboard to steal your sensitive information.

To avoid Clipboard Hack Problem, do the following:

1) In Internet Explorer, Go to Tools -> Internet options -> Security

2) Press Custom level.

3) In the security settings, select disable under Allow paste operations via script and click on 'OK. (Now the contents of your clipboard are safe.)

 Regards: sumod2007@aol.com

 using-different-address-with-gmail.

 Most of you guys have forwarded your emails from other email services to gmail for convenience purpose, but did you know that you can reply from the gmail account with the email address you forwarded your email. You can display anther email address in the “From:” field instead of your gmail address.

- First Log in to your Gmail account on which you wish to add another address.

- Click “Settings” on the top of the page.

- Then select the “Account” tab and then click “Add another email address” in the “Send mail as:” section.

- Now add your Name and the email address you wish to add to gmail. You can specify a different email address for “reply-to” address if you’d like email replies to be delivered to other email account, such as Gmail.

- When done with the above step, click next and then click Send Verification to complete the process. Then Gmail will send a verification message to email address you typed in to verify that the account is yours and you would like to add it to gmail.

- Then open the email inbox of the email address you wished to add and click the link in the verification email sent by gmail or copy paste the verification code to gmail to confirm your request.

- When done with all the steps you are can customize your email address in the “From:” field whenever you want to compose an email.

This has really helped me cause i had to use 2 accounts and now i can use 2 account of my gmail. Hope it helps you guys too….

 Regards: ssumod007@rediffmail.com

morph-photos-online-with-this-amazing

This is simply another cool tool to morph images online. Morphing is basically combining the features of two different images to create one resultant image. This mostly works best with human faces and Morph Thing provides with you with the tools to morph images to your liking.

Morphed photo

Morph Thing just does not offer celebrity morphs alone. You are able to morph your own photos as well. And what’s more, you can morph your photo with your favorite celebrity and find out how you look. Also, you can try morphing photos of your friends and see how it turns out. The only restriction for this being that you need to register. But that is a simple and quick process here as well

Regards: somansumod@yahoo.co.in 

 Google fake logo

Searching the net i came across an interesting site LOGOOGLE.COM

Logoogle.com is the most comprehensive resource on the web for: Fake Google Logos, Google Logo images and Google Logo Pictures, Image Search, Google Search, Gogle Logos, Goolge Logos, Logs, Gooogle, Genuine Google Logos, Google Holiday Logos, Fabricated Google Logos, Photoshop, Photoshopped Google Logos, Rotating Google Logos, Google Logo Art, Google Fan Logos, Google IPO Logos, Global Google Logos, Google Fun, Spoof Google Logos, Google Merchandise...

The above logo is one them.........i think u will enjoy

remove-windows-xp-splash-screen

Disabling the Windows XP splash screen will reduce boot time.

1 To remove it first do a search fo a file called "boot.ini" located in \Windows\ .

2. Open the file with Notepad and add "/noguiboot" after "/fastdetect".

 get-more-disk-space-convert-fat32-to.

 First this trick need an ntfs disk, if u have fat or fat32, the convert it here is hw:open ms-dos and write

convert X:/fs:ntfs

Replace X by the drive name (c or d or e)

For example... for drive C:\

convert c:/fs:ntfs

now select a drive (c or d or e.......) right-click and propreties, then click on general and select "compress drive to save disk space" and press ok...no data will be damaged or removed.

put-ur-name-in-windows-start-menu

now the main thing u have to do is :

1) go to "C:\WINDOWS" and there copy the "explorer.exe" and paste it on the desktop and rename it as ur name. for example: "sagar.exe"

2)now open the resource hacker that u have downloaded earlier.

click on file menu select open.

from the open menu select renamed file for example : "sagar.exe"

now from left side of resource hacker select "String Table" and then folder "37" then select select "1033" on clicking this some text will appear on right side of the resource hacker.

on the right side u will see some thing written as "start" now what u have to do just put ur name in place of start.

now compile it and save it.

3)Now cut the renamed file i.e "sagar.exe" from ur desktop and paste it in its original path. ie "C:\WINDOWS".

4) Now select "start menu" and then open run on that type "regedit".

5) On regeditor select "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\Windows NT\Currentversion\Winlogon"

now on the right side of the regeditor doubleclick "shell" then chane the "value data" as the modified file {for example:"sagar.exe"} and press ok.

6) Now restart ur system. u will feel gr8 to see ur hand work.

  Dr. Watson

Dr. Watson can be a little annoying at times, but there's solution. You can turn it off. The behaviour of Dr Watson is controlled by:

HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\AeDebug

The contents of the REG_SZ value, Auto, controls how Dr Watson operates:

0:

Displays a message box informing the user of an application error.

1:

(default) Causes the debugger to start automatically.

You can disable Dr Watson completely by deleting the AeDebug key. To re-enable it, type:

drwtsn32 -i

at the command prompt.

 hide-files-inside-jpg.

 I found an interesting tutorial. You can hide files inside an innocent looking JPG image. The secretly created image file will open in any image viewer just like a normal file but if you open it with winrar you will find the hidden files. Pretty neat trick.Very few would be knowing it.

Click on the link below to watch the tutorial (its a video tutorial)

 INTERNET ERROR CODES AND MEANING

Sometime you are browsing the internet and trying to open any website, your e-mail and any FTP sites , but you see different error codes there. You should be familiar with these error codes. You can solve these problems if you are well-known with the meaning of error codes.

400 = This is bad request error, First check you may be typing wrong URL name and server could not understand your request.

401 = You are trying to open any unauthorized access site or page. Check your username and password if you are trying to open any webpage.

402 = Payment Required Error

403 = You are trying to open any forbidden page and you are blocked by that domain.

404 = Here you are trying to open the webpage that was removed or re-named, also check the URL spelling.

408 = This is time out error. you should send the request with in time that the server set for you.

start/run/prefetch (deleteall)          Regards:   http://www.orkut.com/Community.aspx?cmm=41176595

start/run/%temp% (deleteall)

Windows XP uses a system called 'prefetch' to organize and preload some of the data necessary for commonly used applications and files. A folder called prefetch is used to store the information the operating system needs to carry out this operation.
After several months of use, the prefetch folder may become quite overloaded with older references to software and files that may no longer be in use.It's a good idea to manually empty the older files out of the prefetch folder every few months or so.
To do this: Navigate to 'c:\windows\prefetch' and delete all .
PF files that are older than a week or two

Here are some simple techniques to remove your temporary files from your hard drive. These temporary files if not cleared frequently, could take up a lot of space. But, if you are working with internet regularly or didn’t care much about your temporary files, you can keep them. Oh, btw, these temporary files makes your webpage loads faster and makes programs runs much faster, no doubt.

1. Start > Run > Type %temp% in the text field (including %). You can delete all the files from that folder. In case, a file is currently used by a running program, you will not be able to delete it. Do it at a later time, or when you stop every program that is running.

And just press the Up button from this folder and you will see a folder named “Temporary Internet Files”. Guess, you know what to do.

2. Start > Run > Prefetch : You can delete all the files from this folde
3. Start > Run > Temp : Same as prefetch.

4. You can search for a temporary files yourself by typing *.tmp in the Find files or folders. But this is risky.

To clear history, cache, cookies..etc.etc… you can do it easily from the browser itself. One recommendation, do defrag your hard drives frequently, at least once a week. Do Disk Cleanup. And you can have certain software for junk file removal and registry cleaner.

¿ʇxǝʇ sıɥʇ pɐǝɹ noʎ uɐɔ

There is nothing special but... I like the way how David Faden can create this small tool which you can use to flip the text you typed. You can type anything you want and this tool will invert them.The flip text generator is a single page, single click service that flips or, in other words, inverts the text you type in as input. Also, since the encoding of the flipped text is UTF-8, it would display properly in most places. That is to say, there would not be any errors as in the case of the Japanese or Chinese language.

How to find the IP address of the sender in Gmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.

Finding IP address in Gmail:

1.Log into your Gmail account with your username and password.

2. Open the mail.

3. To display the headers,* Click on More options corresponding to that thread. You should get a bunch of links.* Click on Show original.

4. You should get headers like this:Gmail headers : nameLook for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is65.119.112.245.That is be the IP address of the sender!
5. Track the IP address of the sender.

Try to create a folder in Windows with either of these names--
"con" or "nul" or "Aux" or "Lpt1".
Windows will not let u create ....

Reason: all this correspond to some of the famous ports
>con corresponds to the console

>Lpt1 corresponds to printer and so on....

HOWEVER I FOUND A TRICK TO CREAT FOLDER "CON"

Here is a simple method..........
Rename folder from the right click option........
Now press alt and press 255...
press 255 frm the right sideof the key bords i.e., num pad....
where only numbers r given.....
now write con and then press enter.....huh!!
you ll see a con folder in ur pc
and also you can delete it easily

 PicJoiner joins multiple images into one single JPEG image
Add your photos from ur computer
Give the number of rows and columns (as above picture has 2 columns and 2 rows )
Press Build and open 

 You have a lots of photos in some folder on your computer, all have numbers-names, and you want to name them like Holliday1.jpg, Holliday2.jpg, ... Don't need to do that one by one. You can do that automatically with this little trick.

Open that folder and chose View - Thumbnails

Left click on any picture and CTRL + A. That way you will select all files in that folder.

Right click on first pic and chose "Rename" from drop-down menu.
renaming files tip

Windows XP will highlight name of that file and you will be able to name it. After filling the name, click somewhere outside, in white space. You're done. If you named firs file "Anything" all selected files will get names "Anything1", "Anything2", "Anything3", and so on. 

 Remove SHORTCUT link from the desktop folder

Posted: 30 Oct 2007 08:17 AM CDT

how to remove short cut arrows on u'r desktop items
just go to >start>run>regedit>hkey_classes_root>u
find a file by name lnkfile click on that to that right
u can see a file by name is shortcut delete that and
again come to left click on pipfile u delete again is shortcut
then restart the pc u cant see the shortcut arrow

ENABLE RIGHT CLICK ON WEB SITES…….

Lots websites have disabled the right click function of mouse button..... it's really annoying.This is done so that you don't able to copy the(via right-click:>>save picture) thier photos or images or any goodies.

Unfortunately it disables all right click funtionality .You can enable it by clicking:
Tools>>internet option >>security tab>>custom level
scroll down to scripting section, set active scriting to disable
Click ok a couple of times .

You'll probably want to turn this back to "enable" when your done .

Enjoy....

FUN WITH MS WORD

Open msword and type

=rand(200,99)

Press enter and see the result......

This also works with =rand(125,21)

find-out-email-sent-by-u-is-read-or-not

Now you can find out when your email has been read by the recipient! No more guessing: "Has he or she read my email yet?"

SpyPig is a simple email tracking system that sends you a notification email as soon as the recipient opens and reads your message.

It works with virtually all modern email programs: Outlook, Eudora, Yahoo Email, Gmail, Hotmail, AOL Email and many others.

Best of all, SpyPig is FREE! No spam, no virus, no adware। You can use it as often as you like, and there's no catch.

The system is very easy to use. In just few minutes, you'll be able to use it like a real spy!

To start using SpyPig, follow the simple steps in the SpyPig Farm .

Enjoy!

 Really-mind-blowingProven Fact

do try it

Just do it - don't cheat!!!!!!!!!!!!

Try this ..

This will blow your mind...!

Just do it - don't cheat!!!!!!! !!!!!

Try this its actually quite good.

But don't cheat!

Count the number of F's in the following text in

15 seconds:

FINISHED FILES ARE THE

RESULT OF YEARS OF SCIENTIFIC

STUDY COMBINED WITH THE

EXPERIENCE OF YEARS

Managed it?

Scroll down only after you have counted them!

OK?

How many?

Three? (You r definitely male!!!)

Wrong, there are six - no joke!

Read again!

FINISHED FILES ARE THE

RESULT OF YEARS OF SCIENTIFIC

STUDY COMBINED WITH THE

EXPERIENCE OF YEARS

The reasoning is further down...

The MALE brain cannot process the word "OF".

Incredible or what?

Anyone who counts all six F's on the first go has

a brain of a Female

You can test this by asking a Guy/Girl near you

to work it out.

 chat-with-your-friends-through-ms-dos

1. All you need is your friends IP address and your Command Prompt.

2. Open your notepad and write tis code as it is.................. I would prefer you to copy this !

@echo off

:A

Cls

echo MESSENGER

set /p n=User:

set /p m=Message:

net send %n% %m%

Pause

Goto A

3. Now save this as "Messenger.Bat".

4. Drag this file (.bat file)over to Command Prompt and press enter!

5. You would then see some thing like this:

MESSENGER

User:

6. After "User" type the IP address of the computer you want to contact.

7. Before you press "Enter" it should look like this:

 automatically-close-non-responding-pgm

 With a small registry tweak, Windows XP can be set to

automatically close any program that 'stops responding'

(crashes), eliminating the need for you to use the task manager to

close down the offending software manually.

Steps:Open REGEDIT and navigate to HKEY_CURRENT_USER\Control

Panel\ DesktopModify the REG_SZ entry AutoEndTasks with a value of 1

Note:Without having much knowledge in Registry Editor Dont try.

Before editing registry take a back up.

Back Up Registry:Start --> RunRegeditFile --> ExportAnd export the registry to the safe place.

 make-hard-drive-inaccessible

when double clicked on this drive an error message will open saying it is inaccessible .This is an alternate to hiding a drive and making it inaccisible. Here's how u do that :

Go to the registry editor and navigate to the following place :

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

In the right hand pane for the Explorer key, create a new "DWORD" value named ViewNoDrive

Double click the new value and enter it as .......

for hiding A drive set value as 1 , for B its 2 and C its 4 and so on and for Z its 33554432

generally multiply it by 2 for the next alphabet to hide

Once done, reboot or log off and login in again. Then try double clicking the drive you made inaccessible.

You should receive a message stating that the drive cannot be accessed

HOW TO FIND UR IP ADRESS

To find your IP Address,

1. Go to Start —> Run

2. Type cmd

3. Command Prompt will open.

4. In that, type ipconfig /all

5. You will see your IP Address

type-message-in-ur-desired-language

This is an eyecatching tweak for people who would like to have some Hindi text in their signatures or who would like to scrap wishes in hindi. If you wanna type a message in Telugu/Hindi or some other desired language.. Here is the way!! No third party software is needed. This is all stuff to do with Microsoft word.

Open Microsoft word and select Symbol in insert menu. Select font as Mangal and subset as Devanagiri. Here u find all the characters that are required to type any alphabet.

Suppose if you want to type "अपुन अच्छा लडका है" Insert the following symbols in the order. Neglect + and <> signs. I just placed it for seperation.

अ + प + ु+न <> अ + च + ्+ छ + ा + ल + ड + क + ा <> ह +

While typing the characters, you will observe the related characters merging themselves. After typing the required message, just copy and paste the characters wherever you want. Soon after u paste the message.. u may notice blank squares appearing instead of message (in Googletalk window for example).. Dont worry.. The tweak works after you save it/send it.

If u wanna have ur profile name of Orkut in Hindi... U can do the similar thing... Just type the text in microsoft word. Edit your profile and paste the text there... You can also send the messages in Google Talk or Yahoo IMs.

Similarly.. use Gautami font for Telugu and Tunga font for Kannada. You should download Unicode fonts for other languages to enable this feature...

There are editors available which will do the same work for you. But, for small messages, this is useful.